Installing Backerboard on wood floor.? - installing floor tile backerboard
The tile installation this weekend and I want to know how best prepared to back down. I have a solid wood floor. If the tiles on the boards of directors have staggered or can sit up and down. I heard things that I shared, that a layer of contact cement on the floor. Thanks
Installing Floor Tile Backerboard Installing Backerboard On Wood Floor.?
3 comments:
If, by all means on the way at the seams. You do not want the glue (too much), you must use the remote control. . Best way is to keep all documents that the Council have. Exit the place and every brand of PC. Nothing fancy long as you lift it. Thin define the area (14x1x4 square notched trowel) and insert the board and walk around the PC to get full coverage. If all the computers in thinset Nagel are living the hell of it (or). 8 "oc in the field and 4 / 6 inches along the seams so that 1:8 to 1 / 4" seam tape space.You w / leftover thin ribbon or stolen. All this is consistent w / ATC and writing guides for the act of a book .. Other questions you can contact me at my avatar and Thursday-mails are not my notes
Please follow these instructions, you can not sink into the ground. The reason for the conclusion of a series of fines for each system of the 1st Floor. Create space to expansion and contraction. GL
On a large area that it is better to stagger the joints of the sponsor on board in order to avoid that promote long career seam cracks. To be sure, I would use a construction adhesive under the sponsor on board, and all six-inch screws to floor joists, if possible, to the fullest extent of the sponsor on board. It is long, but it's worth it.
as an interior designer (25 years). I initiated and found the installation work of many tiles. (and was responsible) for the results. Always use professionals Backer board screws (from the company producing the film sold), (which come with something special for your drill to set securely and to avoid lifting or moving, you'll notice, the board looked for areas with screws Premark the seabed.) Why should you have a chance to find the product they recommend for the best results.following their lessons with the screws that you do not have to use a product between Backer board and use sub - floor.
Post a Comment